SLC21/WK4: Introduction To House Wiring And Load Handling.

_{Assalamualaikum Everyone. I am @imranhassan
From #Bangladesh}

Edited with Canva.

How are you all? I hope you are well by the grace of God, I am also well today. Today I am here to share with you @solaymann, sir, directed by #electricity-s21w4, SLC21/WK4: Introduction To House Wiring And Load Handling. Thanks, @solaymann, sir, for organising such a nice contest. And in today's competition, according to the rules of the contest, I have explained many things about electrical and by taking pictures step by step, I myself have learned a lot. And I thank you again for organising such a nice contest, and I'm going to start my post.

🟨 Electrical wiring is an important thing If we do not wire the house or if we wire wrongly, then we have to face a lot of danger Maybe fire in your house or any other accident may happen. Electrical wiring is the arrangement of switches, circuit breakers, etc. according to the rules for the purpose of supplying electricity to a place. We call it electrical wiring. Basically, this electrical wiring is of three types: one is internal wiring, the second is overhead wiring, and the third is underground wiring. Internal Waring We call house-warming. Waring that is done indoors or in a house or house with a roof is called indoor waring.

🟦Features of Electric Warring:

🟨 There are a few things to keep in mind while doing wiring. If you don't pay attention to these things, then you spend a lot of money on waring, but that waring did not work as you wanted. Those things are firstly that the waring that you do must be durable and strong and that waring must be completely safe. While wiring, wiring, switch sockets, circuit breakers, fuses, etc. should be of suitable current rating. If you use a lower current rating or overdo it, your switch may burn out circuit breakers, etc. And we may suffer financially.

🟨 My house has concealed waring. Concealed Waring Before buying a building or building a house, its point-like group is cut from the brickwork and lined with PVC pipe inside. Then, when the building work is completed, the lines are drawn through the pipe with a GI cable to the switchboard, and connections are made to everything like fan, light, AC, TV, fridge, etc.

🟨 And before doing this concealed wiring, one must always use good-quality wiring so that it lasts longer.

🟨 And the best advantage of concealed wiring is that it is hassle-free and makes the house look great with no wires visible inside the house.

🟨 But concealed wiring has a downside that if there is any problem in the line it is very difficult to find out the problem.

🟨 At present, 80% of people do this concealed waring to make the house look beautiful inside. Earlier, different types of waring were common in homes. But now everyone is making buildings, and this concealed waring is chosen by everyone.

🟨I have taken here some materials needed for waring.

5 hole board

Socket

Switch

indicator

Tester

Screw driver

Pliers

I am sincerely sorry I could not connect the switch board as shown in the diagram you showed. I had some necessary switches, boards, and sockets I made a connection with and illustrated. And from there I made a switching socket board with indicators to use mobile charging and different things instead of lamps and fans. And I am sharing it step by step below.

First, I gathered all the necessary things together. Then three sockets, a switch, and an indicator—these five things I put inside the 5-hole board.

Then I turned the board upside down and put all the screws on the back. Then I took a line of 220 volts, negative and positive.

Then I check the line through the tester, which is positive and which is negative, according to which I have to join the negative line. Then I took a small cable.

Then I join them all together on the negative side with a small wire. Then on the positive side, I joined a short wire through to the three sockets and a switch and left the indicator positive line to the switch to turn the board on and off.

Then I took the positive main line from the indicator via a small red wire to the other side of the switch. By placing the red wire, I have the whole board line pulled and a switching done.

Then I put four screws around the two handling boards together.

Then I checked my line with the tester. Then I put two mobile chargers here and completed the mobile charging with the switch, and my board is working fine.

According to the space design, the earthing should be placed in the specific place where you will get the most efficiency. The entire world must be connected to the earth. If there is no earthing, no matter how well we do the wiring, we will not be safe. And above all, the waring should look spectacular and beautiful.

I must be careful when doing electrical work. I always stand on a wooden chair and put plastic sandals on my feet when I work above. And I don't work in a wet place; when the place is dry, then I want to work there. And before I work, I check the main lines and test the main current line with a tester. And many of us have a bad habit of biting our mouths and ripping off the wires I always avoid.