New to Nutbox?

Let's do it...Do It Yourself👉Craft, Creativity, Drawing, origami, DIY, Recycling and more

14 comments

sadaf02
63
6 days agoSteemit3 min read
Assalam-o-Alaikum Steemians !

Good Evening !

How are you all ? I hope with the blessings of Allah Almighty all of my steemian friends will be safe and sound. I am also good. Alhamdulillah !

I am thankful to @mesola ma'am for organizing such a fantastic contest every week. It is incredibly inspiring for me because it fosters my creativity. So , today I am once again here to share my creative skills with you guys. I hope that you like my creativity. I made a pen holder for my pens. There was no place for my pens where I kept them So I decided to make a pen holder for my pens. I use plastic bottle for making pen holder.

Sending love and warm wishes to all Steemians !

Now I calling some of my steemit friends for taking part in this exciting contest :
@zisha-hafiz
@pink-ring
@rony-hafiz
@emmaboy23

Final Result :

IMG_20241115_222319_023.jpg

Materials which I used for making of pen holder
  • Plastic bottles
  • Cardboard
  • Fomic Sheet in purple color
  • Scissor
  • Glue Gun
  • White pearls

Lets come to know how I made the pen holder from this materials.

Step 1
  • In the begining , I washed the bottles with water then after that I cleaned it with a piece of cloth. Then I heat up the knife. When it is heated I cut the bottle. Be careful while doing this. You can also cut it with scissor.

IMG_20241115_180713_408.jpg

Step 2
  • Then I cut the purple fomic sheet according to the size of the bottle. I cut the four pieces of fomic sheet. Two for big bottle and two for small.

IMG_20241115_184056_845.jpg

Step 3
  • Then I cut the cardboard with scissor. Then I attached fomic sheet on it.

IMG_20241115_192147_170.jpg

Step 4
  • Then I attached the fomic sheets which I cut in the second step on the bottles. The big sheet for big bottle and small for small bottle.

IMG_20241115_192757_267.jpg

Step 5
  • Then in the fifth step we need glue gun and white pearls.

IMG_20241115_192904_211.jpg

Step 6
  • Then I turn on the glue gun and left it for heat about three to four minutes. Be careful while using this glue gun. Then I attached the pearls on the upper side of the bottles with glue. Subsequently I attached the pearls on lower fomic sheet.

IMG_20241115_194406_72.jpg

Step 7
  • Then I attached the bottles on the cardboard with glue gun.

IMG_20241115_222319_075.jpg

Step 8
  • My pen holder is ready. Now I put my pens in the pen holder. I hope that you like it.

IMG_20241115_222319_073.jpg

Thank you so much friends for being with me. Thank you for reading my post patiently.
Take care of yourself.
Remember me in your prayers.
Special Thanks To

@mesola

Best Regards

@sadaf02

Comments

Sort byBest